Fence Installation Summerville SC can serve some purposes including securing a yard or pool area, providing privacy, keeping pets and young children safe, and deterring unwanted trespassing. Homeowners can choose from a variety of materials and styles when installing a fence.
Using a taut string guide, set your corner and end posts. Make sure they are plumb and brace them if necessary to prevent leaning over time.
When planning a fence installation, the location of the structure is important. It determines the type of fencing materials needed, and also whether or not a building permit is required. For example, some communities have covenants that dictate how high a fence can be and what kind of material it must be made from. It is also a good idea to check for utility lines before starting the project. Often times, digging into these lines can be quite expensive. It is also a good idea to ask neighbors if they have any concerns about your fence. They may be able to give you some insight into what type of fence would work best in their yard.
Once you have a clear picture of what you want your fence to look like, you can hire a contractor to help you design and build it. A professional can help you save time and money by recommending the right materials and styles for your property. They can also guide you through the process of obtaining permits, and help you navigate any potential issues that could arise.
While it is possible to install a fence on your own, it can be a complicated project, especially for first-time builders. Unforeseen problems such as rocky ground or wild vegetation can make the job more difficult than expected. Hiring a professional can be well worth the cost, particularly if you’re on a tight budget.
During the design and planning stages of the fence installation, your contractor will take measurements of the area you intend to enclose. They will then use these measurements to get the appropriate amount of materials needed for your fence. During this stage, you can discuss any preferences you have for the design of your fence. For instance, you can choose to add gates or a decorative touch such as flowers or climbing plants.
If you build a fence within your property line, you may be depriving your neighbor of access to a view or their driveway. This can lead to disputes and could even affect your property value if you ever decide to sell.
Materials
When it comes to fencing, the materials used are crucial. They are responsible for securing the property, ensuring privacy and providing shelter from the elements. The right material can also add to the visual appeal of the home. Choosing the best fence material will depend on the desired outcome and budget. For example, vinyl offers a low-cost, durable option that is easy to install and resists moisture and fade. Wood offers a more traditional appearance and provides security and privacy, while aluminum is lightweight and can be used on a sloped yard. Wrought iron offers a classic look and is long-lasting.
Another option is metal fencing, which can be made out of galvanized steel or iron in various forms and designs. This type of fencing is ideal for areas facing minimal humidity and moisture, and it can be easily customised to suit the homeowner’s needs.
Masonry is another type of fencing that can be constructed from brick, stone or stucco. This type of fence adds stately design to a property, and it can be combined with other types of fencing materials for better results.
If you want a fence that will hold up well against the weather, you should consider using wood such as cedar or teak. These woods are resistant to warping and shrinking, and they can be treated with a penetrating sealant at the time of installation and yearly going forward.
Plastic fences are another option, and they can be molded into many different shapes and styles to suit a property. However, they are prone to fire accidents and are not as sturdy as other fences.
When purchasing the materials for a fence, the following tools should be considered: a level, torpedo level, post hole digger and digging bar. A level is essential to ensure the ground is even, while a torpedo level checks whether a surface is plumb or not. A post hole digger helps to dig holes for the posts and can be found at most home improvement stores. A digging bar is useful for digging through rocky or tough ground and can be bought at most hardware stores.
Design
Whether you want to keep pets and kids safe from busy roads or just enhance your home’s curb appeal, a fence can be a great addition to your property. Depending on your needs, you can choose from a variety of different fence styles and materials. A basic fence can delineate property boundaries, while a more elaborate structure can add privacy and keep intruders out. Whatever you choose, it’s important to plan ahead and consult the professionals for help in getting started.
The first step in planning a new fence is to take a look at your property and determine the dimensions of the area you would like to fence off. This will help you figure out how long and high to build your fence. You can also consider additional factors, such as the landscape and grade of your yard. This may impact how far apart the fence line posts should be and if they will need to be reinforced due to elevation changes.
Once you’ve determined the location of your fence, it’s time to dig the post holes. During this process, fencing contractors use a hydraulic auger to create a hole at the desired depth and then fill it with concrete. This method is more efficient and quicker than traditional methods, and it also helps to eliminate the need for multiple trips when digging holes.
After the fence posts are set, it’s time to install the rails. Depending on the style of fence you’re installing, the rails can be installed using panels or pickets. Panels are large pre-fabricated pieces that can be installed quickly and provide a uniform look, while pickets are individual boards that create space between them – perfect for the classic white picket fence look.
The next step in the fence installation process is to add the fence fabric or gates. Fence fabric is typically made of wood, vinyl, or chain link. It is attached to the posts and rails using ties, which are usually closed wire clips or pre-formed open wire rings that close up into a ring. The ties are usually placed on the outer edges of the fabric to prevent them from catching on objects or hanging on the rails, and they are also used to tie together multiple lengths of the fence.
Installation
It’s usually more cost-effective to hire a professional fencing company than to build the fence yourself. The company can provide a complete package of materials and services that can save you time and headaches.
A professional will have the equipment and expertise to deal with unforeseen challenges that may arise during construction, such as rocky ground or unruly vegetation. A good fencing company will also offer a warranty and guarantees to protect your investment.
Before the project begins, the company should consult with your municipality or homeowner association to determine if there are any restrictions on fence design, height and placement. Many communities require a building permit for fencing projects. Your local utility companies should also be contacted to schedule a service to locate and mark the location of any buried utilities.
When digging post holes, the company should take care not to bury them too deep. If a post is buried too deep, it can weaken the structural integrity of the entire fence. It’s a good idea to have the posts set in concrete after they are dug, so that they will be secure and last for years.
Once the fence posts are in place, they can be covered with gravel. This will help keep moisture away from the posts during inclement weather and extend their life. Typically, pea-sized landscaping gravel is used for this purpose.
Next, the company will install the fence panels or pickets. They should check each panel for plumb and use a carpenter’s level to ensure that it is securely set. A paneled fence is more efficient to build than a fence built with individual pickets, as it allows for the fence to be completed much faster.
Before the final coat of stain is applied, the company should let the wood dry completely. This can be done by allowing it to air-dry, or it can be dried with a tack cloth. A final coat of stain or sealer can be applied with a brush or roller, making sure to cover every surface and crevice. Once the fence is finished, it will look great and provide years of protection for your property.